Display options
Cite
Gan TH, Hutchins DA, Green RJ, et al. Noncontact, high-resolution ultrasonic imaging of wood samples using coded chirp waveforms. IEEE Trans Ultrason Ferroelectr Freq Control. 2005;52(2):280-8doi: 10.1109/tuffc.2005.1406553.
Gan, T. H., Hutchins, D. A., Green, R. J., Andrews, M. K., & Harris, P. D. (2005). Noncontact, high-resolution ultrasonic imaging of wood samples using coded chirp waveforms. IEEE transactions on ultrasonics, ferroelectrics, and frequency control, 52(2), 280-8. https://doi.org/10.1109/tuffc.2005.1406553
Gan, Tat Hean, et al. "Noncontact, high-resolution ultrasonic imaging of wood samples using coded chirp waveforms." IEEE transactions on ultrasonics, ferroelectrics, and frequency control vol. 52,2 (2005): 280-8. doi: https://doi.org/10.1109/tuffc.2005.1406553
Gan TH, Hutchins DA, Green RJ, Andrews MK, Harris PD. Noncontact, high-resolution ultrasonic imaging of wood samples using coded chirp waveforms. IEEE Trans Ultrason Ferroelectr Freq Control. 2005 Feb;52(2):280-8. doi: 10.1109/tuffc.2005.1406553. PMID: 15801315.
Copy Download .nbib Format: NLM
Share it on

IEEE Trans Ultrason Ferroelectr Freq Control. 2005 Feb;52(2):280-8. doi: 10.1109/tuffc.2005.1406553.

Noncontact, high-resolution ultrasonic imaging of wood samples using coded chirp waveforms.

IEEE transactions on ultrasonics, ferroelectrics, and frequency control

Tat Hean Gan, David A Hutchins, Roger J Green, Michael K Andrews, Paul D Harris

Affiliations

  1. School of Engineering, University of Warwick, Coventry CV4 7AL, UK. [email protected]

PMID: 15801315 DOI: 10.1109/tuffc.2005.1406553

Abstract

A noncontact ultrasonic inspection technique has been developed to study the properties of wood samples in air. The system makes use of two broad bandwidth capacitive transducers, combined with signal processing techniques. A coded chirp signal was used in the current application to provide a waveform that could be postprocessed to provide sufficient sensitivity for transmission across samples of wood. It will be shown in this paper that the signal-to-noise ratio (SNR) can be greatly improved using two signal recovery techniques, namely pulse compression and swept frequency multiplication (SFM). A simulation of both techniques is presented and compared to experimental data. As will be seen from the experimental results, it is possible to perform noncontact ultrasonic experiments to extract a range of useful information such as ring density and the presence of microcracks.

Publication Types